Pole Shaft Specifications

The pole shaft is fabricated from a weldable-grade, hot-rolled commercial quality carbon steel ASTM A-595 Grade A with a guaranteed minimum yield strength of 55,000 psi after fabrication. It is a one- or two-piece* construction with a full-length, longitudinal weld. The pole tapers at a rate of 0.14″ per foot.

Base Plate Cover

A full base plate cover is supplied. For 20-35′ poles, the base cover is automotive structural grade ABS plastic with a UV inhibitor to eliminate color fading. It is rust proof and tamper resistant. For 39-60′ poles, the base cover is made of two-piece formed sheet steel.

*Poles greater than 39′ are of two-piece, slipfit construction.                                                                                                                                                                                                                                                                                       **We reserve the right to use a pole-top adaptor for direct mounting of fixtures, as deemed necessary.
Part Number Mounting Height Effective Projected Area Shaft Dimensions Base Info Base Plate Spec Sheet
80 90 100 120 Butt Top Wall Anchor Bolt Diameter Bolt Circle Square Height
RTS-20-5211 20 12.2 9.8 7.9 5.6 5.2 2.4 11 .75 x 28 9.5 10 0.75 NA
RTS-20-6511 20 28.6 23.2 18.7 13 6.5 3.7 11 1 x 40 10 11 1 NA
RTS-25-5911 25 9.4 7.6 6.2 4.4 5.9 2.4 11 .75 x 28 9.5 10 0.75 NA
RTS-25-7011 25 22 17.8 14.4 10 7 3.5 11 1 x 40 10 11 1 NA
RTS-30-6511 30 8.1 6.6 5.3 3.8 6.6 2.4 11 1 x 40 10 11 1 NA
RTS-30-8-0-11 30 22.1 17.9 14.5 10 8 3.8 11 1 x 40 11 12 1 NA
RTS-35-8-5-11 35 19.3 15.6 12.6 9 8.5 3.6 11 1 x 40 11.5 12 1 NA
RTS-39-9-0-11 39 17.9 14.5 11.7 8.2 9 3.5 11 1 x 40 12.5 13 1 NA
RTS-39-1011 39 23.3 18.8 15.2 10.7 10 4.7 11 1 x 40 13.5 14 1 NA
RTS-39-1207 39 63.4 51.3 41.4 29 12 6.7 7 1.5 x 60 16 17 1.5 NA